PERFECT TIMING FOR EVERY APPLICATION

Jauch frequency control products are produced and configured according to the highest quality standards. Therefore they provide reliable timing also under extreme conditions and for the most complex applications.

The Universal MEMS Oscillator

Configured according to customer specifications
Best shock & vibration resistance at fast availability (fast delivery service)
Compatible to the standard housings sizes 2016, 2520, 3225, 5032, and 7050

View Product

Oscillator for Real Time Clock Applications

Extremely temperature stable 32.768 kHz output
Very low power consumption
Best shock & vibration resistance
Miniature chip scale housing (1.5 x 0.8)

View Product

Quartz crystals with best price-performance ratio

Standard frequency stability ± 10 ppm
High availability
Long-term availability

View Product

Quartz Crystals

Quartz crystals in SMD or pin versions, in the frequency 32.768 KHz and the MHz frequency range.

To Overview

Quartz Crystal Oscillators

Quartz crystal oscillators for each application, also according to customer specifications.

To Overview

MEMS Oscillators

MEMS oscillators configured with high shock and vibration resistance for your application.

To Overview

Automotive Products

AEC-Q qualified quartz and MEMS oscillators

To Overview

Core competence movies - Our services - your benefits

/ablage/med_00000679_1478266303_en_quarze_film_1_beratung_entwicklung_v06a_cc3.mp4

/ablage/med_00000680_1478266304_en_quarze_film_2_produktion_qualitaet_v06a_cc.mp4

/ablage/med_00000681_1478266304_en_quarze_film_3_internationalitaet_liefersicherheit_v06a_cc.mp4

/ablage/med_00000682_1494925635_en_quarze_film_4_v08a_ohnevaeth.mp4

The right component

Quality regardless of the volume

Reliably available

The specialists for Frequency products

As a producer, we know what it takes

As well as economic benefits, our production facilities at various locations also provide our clients with the certainty that they can rely on the availability of their frequency control products.

Small quantities in Germany

Development and production of small quantities and prototypes according to customer specifications in Villingen-Schwenningen.

Series production in Asia

We use production lines in Asia for the manufacture of medium and large series.

Fully automatic MEMS configuration

The custom configuration of our MEMS oscillators is fully automatic in Villingen-Schwenningen.

Quality provides security

Our production know-how is also evident in quality assurance. This begins with the raw material selection: We use only high-quality, cutting angle measured blanks. We do regular audits of our suppliers as a matter of course and we get ourselves certified regularly.

Quality management

Measures to ensure and improve our effectiveness and efficiency.

Quality management

Internal audits on systems, processes, and procedures
Audits at production facilities
Supplier audits

Use of performance indicators

Regular collection of all relevant information in order to make appropriate decisions.

Use of performance indicators

Reliability performance indicators
FIT + MTTF values
SPC
DPPM
Customer satisfaction scores

Components qualification

Extensive quality tests to ensure that materials and components are safe to use.

Components qualification

Internal qualification of all components possible
Extensive testing facilities
In-house executionof all AEC-Q 200 tests
PPAP / FMEA standard
Determining the reliability performance indicators of specific components
Compliance with the RoHS / REACH guidelines

Components examination

Quick and thorough analysis of components in terms of functionality and durability.

Components examination

Analysis of components and circuits
Special measuring equipment for comprehensive tests:
Mechanical, electrical, climatic tests, X-ray analysis
8-D reports and detailed analytical reports within a short time
Monthly evaluation of the QA metrics

Checking of incoming and outgoing products

Continuous quality control of materials used and products manufactured.

Checking of incoming and outgoing products

Inspection of incoming products according to AQL standard
100% test
Tests according to customer specifications
Temperature range exams

Calibration

Measurement technology for reliable reproducible measurements and documentation.

Calibration

Calibrated frequency measurements
Periodic calibration of measuring instruments internally and by accredited laboratories

QA training

Regular training sessions in order to maintain the consistent quality Jauch is known for, even for new developments.

QA training

Continuous training of staff at the headquarters in Villingen-Schwenningen

Certifications

Complying with international standards of quality management and environmental management – also for the automotive industry.

Certifications

OUR EXPERTISE FOR YOUR DEVELOPMENT

Talking to us about ideal timing solutions early on in your application’s design phase is well worth your while. Ideally this will help to cut development time and reduce costs. Moreover, you will avoid mistakes when it comes to component selection of specification. This increases operational reliability in series and ensures the optimum product lifetime. Most importantly, in Jauch you have an efficient partner to supply your reliably. So make use of our technical support!

Consultation

Jauch specialists will advise and assist you before and during the development phase in detail.

more information

Selection of suitable components

Avoid incorrect decisions
Minimize development problems
Optimize lead times
Optimize costs

Help with specifications

Joint creation of custom specifications for your project
Selection of products according to your requirements
Individual precalculation

Technical support along with distribution

Precalculation for special applications
Optimized specification with regards to all project-specific parameters
Cost-optimized preselection

Design-In-Support

Jauch has a modern electronic laboratory with which we can optimally support you in developing your circuits.

more information

Sizing assistance for quartz circuits

Product selection based on electrical aspects
Sizing recommendations based on your IC datasheets
Consultancy for special applications
Checking your prototypes in our laboratory

Modification recommendations for quartz circuits

Qualified modification proposals based on our circuit analysis

Correction of mismatches
Correction of the component selection
Correction after layout change

Application safety

We validate your oscillator circuit with special testing equipment in terms of amplification margin and oscillation start up safety.

more information

Oscillation safety investigation

Determation of the resonance frequency
Measurement of electrical parameters
Determation of the amplification margin
Determation of the oscillation start up safety
Checking compliance with specification list (optimization of lifetime expectancy)

Load capacity adjustment

Optimization of the resonance frequency
Optimization of oscillation safety (factor)
Optimization of quartz crystals power (drive level)

Determination of quartz crystals performance

Measuring the quartz crystal current with the help of current probe
Calculation of crystal power (drive level) with regards to predetermined specification

Support for application problems

We can help in solving problems in your circuit.

more information

Determining the electrical quartz crystals parameters

Measurement of electrical parameters of the quartz crystal at + 25 ° C in the quartz crystal instrument.

Optimal design of the circuit

Adjustment of the load capacitance
Optimization of quartz crystal performance

Correction of specifications
Optimizing the design selection

Determining the electrical oscillator parameters

Measurement of all electrical parameters of the crystal circuit in the customer´s application at + 25 ° C

Checking compliance with the specifications
Measurement under simulated climatic conditions
Sized patterns/designs for pilot series and prototypes

Measurement of temperature coefficient

Measuring the behavior of quartz crystals and oscillators in our temperature chambers

Control of behavior at different ambient temperatures
Characterized patterns/designs for production of pilot series and prototypes

Selection of suitable components

Avoid incorrect decisions
Minimize development problems
Optimize lead times
Optimize costs

Help with specifications

Joint creation of custom specifications for your project
Selection of products according to your requirements
Individual precalculation

Technical support along with distribution

Precalculation for special applications
Optimized specification with regards to all project-specific parameters
Cost-optimized preselection

Sizing assistance for quartz circuits

Product selection based on electrical aspects
Sizing recommendations based on your IC datasheets
Consultancy for special applications
Checking your prototypes in our laboratory

Modification recommendations for quartz circuits

Qualified modification proposals based on our circuit analysis

Correction of mismatches
Correction of the component selection
Correction after layout change

Oscillation safety investigation

Determation of the resonance frequency
Measurement of electrical parameters
Determation of the amplification margin
Determation of the oscillation start up safety
Checking compliance with specification list (optimization of lifetime expectancy)

Load capacity adjustment

Optimization of the resonance frequency
Optimization of oscillation safety (factor)
Optimization of quartz crystals power (drive level)

Determination of quartz crystals performance

Measuring the quartz crystal current with the help of current probe
Calculation of crystal power (drive level) with regards to predetermined specification

Determining the electrical quartz crystals parameters

Measurement of electrical parameters of the quartz crystal at + 25 ° C in the quartz crystal instrument.